Tags ‘equipment’

Meat Factories

That is why the meat factories bulk material is cooled, after which it surface formed a crust that prevents the development of harmful microorganisms. For long term storage, to the accumulation of raw materials, use frozen meat (and below-150S). For the manufacture of sausage products such Frozen meat is defrostirovaniya stage (unfreezing), and the seeking raw materials, the closest to their properties to the cooled. Defrostirovanie can carry air-vapor mixture, a liquid. With air defrost raw thawed at t = 0 …

+180 C and humidity up to 90%. After defrosting raw materials supplied to the Department of deboning and zhilovki, where special tables – Boning and zhilovki – separates the meat from the pulpy parts bones, separation of living, a separation of sorts. Here is a division of mascara on the cut. To extend the physical and chemical properties of meat (ripening) use 'mixers' with the addition of spicy-posolochnoy mixture. At using a block of frozen meat to grind it used 'BLOKOREZKI'. Block is loaded into a hopper and crushed blokorezki rotating knives or the guillotine method without defrosting.

Next, the meat after deboning and zhilovki (or grinding on blokorezkah) arrives at a fine grinding in the 'spinning top' or 'MEAT MINCER'. 'Tops' are provided with a set of grids with holes of 2 mm to 32 mm (most models), with a larger diameter (from 26 mm) used in the canning industry. Some models 'tops' (the Russian and European production) can shred the meat with frostbitten temperature to-120C. Pink color is achieved with sausage adding to the stuffing of sodium nitrite.

Comments Off on Meat Factories

Photo

Bill

September 16th

News

Heating System

A key part of any heating system is a boiler. He considered the heart of the heating system. Because no small importance is the selection of the equipment. Depending on the fuel boilers are of the following types: boilers solid fuel boilers Electric boilers gas boilers are wall and floor. First of all, they differ in material, material of the heat exchanger. Wall-hung boilers are copper heat exchanger. Their weight is usually not more than 30-40 kg. The presence of a copper coil limits the maximum power of 31 kW boilers up as copper as raw materials susceptible to burning-through at high powers.

Benefits boilers with copper heat exchangers are: light weight, compactness and ability to install in places with limited dimensions, full staffing – Wall boilers up to 31 kW have in their case all the the necessary components (pump, expansion tank, a security group, etc.). Outdoor boilers are steel or cast iron heat exchanger. Weight boiler with cast iron heat exchanger of 100-200 kg. Such boilers need to install additional devices (pump, expansion tank, a security group, etc.), take up some space. The advantages of boilers with cast iron heat exchanger is a long life. Steel heat exchangers are not so critical to shock and deformations.

They are 2 – 2.5 times lighter iron. But they quickly burn through in a higher degree of corrosion, which causes the condensate formed at low temperatures in the middle of the boiler below the "dew point". Period of service steel heat exchangers depends on the quality of steel, its thickness, operating conditions and ranges from 5 to 15 years.

Comments Off on Heating System

Photo

Bill

January 16th

News
line
March 2024
M T W T F S S
 123
45678910
11121314151617
18192021222324
25262728293031